OT: HFPens Community Lounge: Or Ogrezilla and LOGiK's Nerd Thread ;)

[LOGiK]

Also, Hades, Hollow Knight, Divinity : Original Sin 2 and Shin Megami Tensei V are all really good.

Divinity OS2, get ready to put aside 200 hours for the most amazing adventure.
I so enjoyed the first one AND the monstrosity d: os2.

Spiritually. Same creator. The differing Xeno- games followed Tetsuya Takahashi's employers. Xenogears with Square, Xenosaga with Bandai Namco, and then Xenoblade with his own company (Monolith Soft, which is effectively a 2nd party studio mostly owned by Nintendo).

I highly, highly recommend those games with the caveat that they're absurdly huge and I haven't actually finished any of them. They aggressively scratch that philosophical itch I crave in my JRPGs.

Speaking of japanese stuff, THE BOY AND THE HERON is finally out in the states....
got the japanese version in my sights for watching with wifey one of these days.
Big Hayao Miyazaki admirer here... princess mononoke is, depending on my mood of the day, my favorite film top 3.

 

[LOGiK]

Try to get a glow in the dark one if you can with PLA. Eryone makes a good one of just the normal green glow in the dark that works very well and is quite easy to print with and it's pretty neat how much it glows when it gets UV exposure.

Didn't see this until now,
Just bought 4 matte pla's, (for starting) (i think the matte looks better than the shine of basic) black white red green... 2 silk pla's, gold and i think pink.
One pla-basic blue-grey.

Next round of buying would be either the .2mm or .6/8mm head (after we test out 4mm that it comes with. and possibly next round get hardened steel ((stainless steel??)or whatever the one for use with pet-g)... so next round of filament buys will be petg and maybe the .2mm / .4mm or higher /// different hotbed and glue stuff etc.... etc etc....

HEY.... question, what glue do you use to glue pieces together? just any glue? glue is glue innit?
but is there special glue?

 

[Honour Over Glory]

Didn't see this until now,
Just bought 4 matte pla's, (for starting) (i think the matte looks better than the shine of basic) black white red green... 2 silk pla's, gold and i think pink.
One pla-basic blue-grey.

Next round of buying would be either the .2mm or .6/8mm head (after we test out 4mm that it comes with. and possibly next round get hardened steel ((stainless steel??)or whatever the one for use with pet-g)... so next round of filament buys will be petg and maybe the .2mm / .4mm or higher /// different hotbed and glue stuff etc.... etc etc....

HEY.... question, what glue do you use to glue pieces together? just any glue? glue is glue innit?
but is there special glue?

Ok first, get some desicant packs and ziplock bags or a container that is air tight with those packs in. Moisture matters for filament. If there's moisture the filament will get brittle or have issues printing - stinging etc.

Also go to all3dp.com and study up on print temps and what not for each type - Pla, tpu, petg, abs, Asa, etc.

Then find a new notebook and dedicate it to the printer - you'll want to keep notes on best print temps for each filament. Color additives and different filament brands have different temps that make it work best. They'll have a range written on them which is very broad and vague. For example the Eryone Glow in the dark pla, says 190 is best but I have found 207 was better for me on my printers.


Now glue. Thing about these materials is some glue will eat through the materials. Pla is polylactic acid, it breaks down Eco friendly but some glues will melt through it.

Gluing 3D Prints: The Best Glues for PLA, PETG & ABS

Some designs are too big to 3D print in one piece. So, the parts need to be glued together. Check out the best glues for PLA, PETG, and ABS!

all3dp.com

Here's a good source for info. Like I said, great site for all the questions you'll have - print temp, glass temp, slicer info for best settings, everything.

Oh and quick printing tip - buy an extra build plate or two. PEI flexible are best. Easy to pop prints off and clean. Also these are very cool because the texture shows on the prints that touch build plates.

Amazon.ca

The notebook you keep is handy. You'll want to write down tweaks and what not to slicing settings or print settings and it helps as a quick guide to the nuances you'll face. Do a lot of test prints mate, just a lot. Do the temp tower, the level print tests, benchy is a typical first print to see how dialled in your printer is for detail, level, etc.

Benchy is going to help with calibration etc.

#3DBenchy

The jolly 3D printing torture-test

www.3dbenchy.com

 

[Honour Over Glory]

Divinity OS2, get ready to put aside 200 hours for the most amazing adventure.
I so enjoyed the first one AND the monstrosity d: os2.

Speaking of japanese stuff, THE BOY AND THE HERON is finally out in the states....
got the japanese version in my sights for watching with wifey one of these days.
Big Hayao Miyazaki admirer here... princess mononoke is, depending on my mood of the day, my favorite film top 3.

I gotta watch The Boy and The Heron as well. Been looking forward to it but would rather steam it on the iptv box.

BTW - Japan was super fun to visit.

Although my favorite place I've been the last 10 months is Vietnam. My wife was shocked but happy to see how much I loved it there given I despise places that are that hot. But the overwhelming sense of peace and calmness that washes over you when you're there is just hard to explain.

But back to Japan though, the art and movies by Miyazaki and his son, the many influences by him in Japanese animation was just awesome to see while there. I remember we were in Osaka and my wife turns to me and goes "I'm glad you made me watch My Neighbor Toro, Howls Moving Castle, Princess Mononoke, and Akira." Akira was one I had to force her to sit and watch before we went and she saw the art and little things that reference it in so many of the art stores and Don Quijote's lol.

Don't get me on the absolute f***ing chaos those damn stores are. Their damn theme song is forever burned into my memory. We are going back to Japan next year for the Cherry Blossom festival like we did this year but other parts of Japan. Only trip I have this year is Orlando and Miami later in the year and maybe Hawaii again.

Loading the bloody Suica and ICOCA cards digitally was such a pain in the ass.

 

[LOGiK]

Ok first, get some desicant packs and ziplock bags or a container that is air tight with those packs in. Moisture matters for filament. If there's moisture the filament will get brittle or have issues printing - stinging etc.

Also go to all3dp.com and study up on print temps and what not for each type - Pla, tpu, petg, abs, Asa, etc.

Then find a new notebook and dedicate it to the printer - you'll want to keep notes on best print temps for each filament. Color additives and different filament brands have different temps that make it work best. They'll have a range written on them which is very broad and vague. For example the Eryone Glow in the dark pla, says 190 is best but I have found 207 was better for me on my printers.


Now glue. Thing about these materials is some glue will eat through the materials. Pla is polylactic acid, it breaks down Eco friendly but some glues will melt through it.

Gluing 3D Prints: The Best Glues for PLA, PETG & ABS

Some designs are too big to 3D print in one piece. So, the parts need to be glued together. Check out the best glues for PLA, PETG, and ABS!

all3dp.com

Here's a good source for info. Like I said, great site for all the questions you'll have - print temp, glass temp, slicer info for best settings, everything.

Oh and quick printing tip - buy an extra build plate or two. PEI flexible are best. Easy to pop prints off and clean. Also these are very cool because the texture shows on the prints that touch build plates.

Amazon.ca

The notebook you keep is handy. You'll want to write down tweaks and what not to slicing settings or print settings and it helps as a quick guide to the nuances you'll face. Do a lot of test prints mate, just a lot. Do the temp tower, the level print tests, benchy is a typical first print to see how dialled in your printer is for detail, level, etc.

Benchy is going to help with calibration etc.

#3DBenchy

The jolly 3D printing torture-test

www.3dbenchy.com

It is mostly for the kid, BUT... i will be the foreman basically when things go wrong and such... So yeah, I know moisture is crazy and especially in PA in the summer, the moisture / humidity is just outrageous so I honestly have no idea what to do with that, load and unload pla every single time I guess I'll have to do. It is in a poor location, firstly and mostly - because of the vibration... holy hell can that thing vibrate like a washing machine... that alone caught me by surprise and now have to improvise locations (we have no room man. No table space room at least where you can put a 3d printer).

So I kept the filament on the spool last night after the test 3color benchy mostly because it was a cool dry night (for once). So will do another test benchy probably 1 color when I move it to the new location. --- OH, yeah, I have the gold abs/pla/petg plate (i'm going to buy maybe 2/3 nozzles and 2 or so hotbeds (the stuff is cheap enough surprisingly)) and it does have a cool pattern / sparkle on the bottom of the benchy print.
Test print i'd say is ALMOST spot on. the back cabin opening is off a bit, slight closing of the circle near the top of the circle ---really barely noticeable, minor scuff, but it is there, will have to re-test on a STABLE TABLE. The table it is on now is an old school desk, the table kind for two students, so its long and flat but the legs are TOO LONG... man the printer vibrates to where wifey even joked about it =] the table doesn't stand a chance at all to keep sturdy with that little shaker on top


The thing is magic to me.... really. It basically tattoo's filament with a brain. Bambu is pretty good, happy with the recommendation, looked it up and had no question that was the quality we wanted. Kiddo loves the (bambu handy) app, gets to watch the prints, on the print cam etc....

I don't care much for perfect perfect perfect prints (i do obviously, but i dont want to stress over it to the point i give up... 3d benchy thingy gave me hope for how simple it was-a fragile confidence hah...
rambling... ok thanks again!!
I will start a lil printer bible

 

[Randy Butternubs]

It's been a while since I've posted. I took an inadvertent break from just after St Paddy's Day til yesterday.

In March I started my application to attain my Professional Engineering (PE) license. I've been studying since then but have been so rudely interrupted with other life events. Such as:

1. Completing my $7+ billion decade-long project. (now that that project is done my company is being acquired and I may not have a job come August)
2. Adopting two kittens and dealing with everything that comes with having two little ones. They're getting fixed today.
3. Planning my wedding which just happened on the 29th.

Hoping to finally take my 8-hour PE exam at the start of August.

 

[Deport Ogie]

It's been a while since I've posted. I took an inadvertent break from just after St Paddy's Day til yesterday.

In March I started my application to attain my Professional Engineering (PE) license. I've been studying since then but have been so rudely interrupted with other life events. Such as:

1. Completing my $7+ billion decade-long project. (now that that project is done my company is being acquired and I may not have a job come August)
2. Adopting two kittens and dealing with everything that comes with having two little ones. They're getting fixed today.
3. Planning my wedding which just happened on the 29th.

Hoping to finally take my 8-hour PE exam at the start of August.

Congrats on your nuptials good sir and best of luck with the exam.

I doubt it's comparable and I'm pretty certain you're younger than me but I've been working toward a MSIT, don't ever let them tell you that you're too old to learn some new tricks.

 

[Honour Over Glory]

It's been a while since I've posted. I took an inadvertent break from just after St Paddy's Day til yesterday.

In March I started my application to attain my Professional Engineering (PE) license. I've been studying since then but have been so rudely interrupted with other life events. Such as:

1. Completing my $7+ billion decade-long project. (now that that project is done my company is being acquired and I may not have a job come August)
2. Adopting two kittens and dealing with everything that comes with having two little ones. They're getting fixed today.
3. Planning my wedding which just happened on the 29th.

Hoping to finally take my 8-hour PE exam at the start of August.

Congrats Nubsy.

 

[Tom Hanks]

It's been a while since I've posted. I took an inadvertent break from just after St Paddy's Day til yesterday.

In March I started my application to attain my Professional Engineering (PE) license. I've been studying since then but have been so rudely interrupted with other life events. Such as:

1. Completing my $7+ billion decade-long project. (now that that project is done my company is being acquired and I may not have a job come August)
2. Adopting two kittens and dealing with everything that comes with having two little ones. They're getting fixed today.
3. Planning my wedding which just happened on the 29th.

Hoping to finally take my 8-hour PE exam at the start of August.

Congrats on the wedding. June 29th!

Add Randy & Mrs Randy to the list:

Wedding Anniversaries on June 29

Famous wedding anniversaries and divorces for the 29th of June. See which famous celebrities and historical figures got married and divorced on June 29.

www.onthisday.com

 

[Honour Over Glory]

It doesn't bother me that my Neighbors got a dog, it bothers me that they did and clearly have no idea what to do with the Golden puppy and don't seem to want to take any advice or help. I just have this sick feeling that he's going to end up in a shelter in a year or less or be poorly trained, treated poorly, and not be up to date on his shots and registration and abandoned later on or not survive as long as the pup should.

All day I can hear their little shit of a son and their teenaged daughter yelling at the dog to do tricks, they keep the pup on their deck all day. This is why I think if you get a dog, you should be fined 10grand for bringing it back to the shelter, it's incredibly unfair to the dog to be owned by f***ing morons. Owning a rescue, I know how hard it is to deprogram the vile shit the dogs go through from shitty previous owners and it breaks my heart to see it and also makes me want to go all John Wick on their ass.

 

[Tom Hanks]

Happy 4th of July

 

[Honour Over Glory]

I'm getting very close to seeing if there's a way to report these idiots next door to BC SPCA or whatever the f*** they're called, anonymously. Hearing this poor puppy cry at night at 4am. At best, they'll find out these idiots probably didn't even register their puppy and the shots aren't up to date, which would be a fine I believe. All I heard yesterday was the Dad and the Daughter yell at this dog, like seriously, these morons should be fostering dogs first before they get one permanently because just by fostering they'd have a very quick idea of how a Dog isn't the pet that they can handle.

I wish people would check who they give pets to, it's completely unfair for them to go to absolute pillocks.

 

[Honour Over Glory]

Beverly Hills Cop Axel F is getting hated on by stuck up critic twats. Its like they didn't watch the other movies to know how these movies are. It's fun. I thought the movie was as fun as the first two. Definitely enjoyed watching it.

 

[Gurglesons]

Beverly Hills Cop Axel F is getting hated on my stuck up critic twats. Its like they didn't watch the other movies to know how these movies are. It's fun. I thought the movie was as fun as the first two. Definitely enjoyed watching it.

You are just old HoG. It's okay. Me too.

It's been a while since I've posted. I took an inadvertent break from just after St Paddy's Day til yesterday.

In March I started my application to attain my Professional Engineering (PE) license. I've been studying since then but have been so rudely interrupted with other life events. Such as:

1. Completing my $7+ billion decade-long project. (now that that project is done my company is being acquired and I may not have a job come August)
2. Adopting two kittens and dealing with everything that comes with having two little ones. They're getting fixed today.
3. Planning my wedding which just happened on the 29th.

Hoping to finally take my 8-hour PE exam at the start of August.

Did you get the severance?

 

[Honour Over Glory]

The movie did it's job. I got a heavy dose of nostalgia in the best way and the movies were never that deep and the one time they tried to make it deep it severely failed for part 3. It was a nice throw back to a franchise that is still fun to watch.

 

[Tom Hanks]

Beverly Hills Cop Axel F is getting hated on by stuck up critic twats. Its like they didn't watch the other movies to know how these movies are. It's fun. I thought the movie was as fun as the first two. Definitely enjoyed watching it.

I was surprised it was as good as it was. I thought they’d f*** it up.

Besides the nostalgia boost it was actually a good film. Not a masterpiece or anything but it’s not supposed to be. A solid 7 outta 10.

The only thing that annoyed me was one actors veneers. People love the big and white ones when they were never that big & white to begin with. Looks f***ing weird.

 

[Randy Butternubs]

Did you get the severance?

The acquisition hasn't happened yet, but yes, people who get let go do get a nice severance. It's actually a whole year of pay, your bonuses paid out, and a check for a whole year of health insurance.

There are a number of people who are hoping to be laid off.